NEWS

Latest Post

Cutting of 3080mm Casing & SSVBM Riser for NnG OWF Project

CUT used our 120” extended DWCM to cut a 3080mm diameter, 40mm WT casing, with internal riser (1.42m diameter and 22mm WT) and a soil pipe (220mm diameter, 12.7mm WT). The cut was completed in 9 hours, faster than expected. The image shown is of the riser.

Naga 7 Jack-up Recovery Project – Phase 1

Another successful major recovery project in Southeast Asia region. CUT completed a large number of cuts using our 10”, 18”, 40” and 50” DWCM in support of the Naga 7 Jack-up recovery project offshore Malaysia. We mobilised the equipment and personnel from Singapore.

120″ DWCM for Pile Cutting Offshore Congo

CUT supplied a 120″ DWCM as a contingency in case of premature pile refusal during driving/drilling, offshore Congo. The pile targets were 65KSI steel piles, 104″ OD & 100″ ID in water depths of 15M to 30M.

Cutting of 214.5” (5450mm) OD Disconnectable Single Point Mooring (DSPM) Offshore Australia

CUT have successfully completed a decommissioning scope offshore Western Australia, cutting the 214.5” (5450mm) Disconnectable Single Point Mooring (DSPM), aka the riser buoy, using our 240” machine, deployed vertically. The target consisted of 15mm WT outer shell Shell stiffeners Internal bulkheads Mooring tubes (6) Cable tubes (12) Clump weight tube Gas lift riser tubes (3) … Continue reading Cutting of 214.5” (5450mm) OD Disconnectable Single Point Mooring (DSPM) Offshore Australia